Model ETM
Tank Test Kit
by MC Miller Co.

Designed and Manufactured for Cathodic Protection Testing
of Underground Steel Storage Tanks and Systems.

A complete test kit designed for use by non-technical personnel, such as crews, servicemen, meter readers, etc., but also suitable for the most experienced engineers and technicians.

 

Advantages
  • Detailed tank test manual
  • Low cost
  • Rugged
      
  • Easy to use
  • 0 - 2 volt / go-no-go scale
  • Electrode attached or
    two-lead meter operation
      
Specifications
  • 2 ½" taut-band rugged instrument.
  • Weatherproofed neoprene gasket.
  • 10 megohms input resistance.
  • Solid-state impedance amplifier.
  • Operates on one 9 V transistor battery.
    Low drain - long shelf life.
    Push switch to check battery condition.
    Battery easily replaced and readily available.
  • Push switch to read potentials. Current drain only while taking readings.
  • Scale marked 0 to 2 Volts DC.
    Color band: red to .85 V, green to 2 V.
  • Filter eliminates errors caused by AC.
    Up to 50 volts 50/60 Hz.
  • Operating temperature: 0oF to 150oF.
  • Molded PVC housing.
  • Plastic carrying case with resilient padding
  • Modular construction
  • Weight: about 3 lbs.
  • Size: 2 ½" deep x 10" long.

Close overt-the-tank / structure potential measurements

Fixed cell-moving ground technique for
Checking Continuity Between Structures

Optional Accessories
Intermediate Electrode Extensions, 30" and 15" long. One or more can be used with MCM Model ETM, IA and LC series meters, or between the electrode and the standard electrode extension so that the electrode can be esasily placed at the desire locationn inside manholes, water tanks, etc. Will fit through a 1" diameter augered hole.
Antifreeze
Solution
#17105 - 8 oz
#17207 - 32 oz		 Copper Sulfate
Crystals
#16906 - 12 oz
#17003 - 40 oz		 AGRA Reel
(wire supplied separately)
#30501